Advanced Elastomer Overmolding Solutions
A Better Way to Combine Hard Plastics with Soft-Touch Materials.
Discover CHENVIX™ SkinTouch, an advanced thermoplastic elastomer designed for direct injection overmolding onto compatible rigid plastic substrates.
Without additional primer treatment or soft-touch surface coatings, CHENVIX™ SkinTouch offers a new approach to combining rigid plastic structures with lasting soft-touch performance.
- ADVANTAGE 01 Primer-Free Direct Bonding
- ADVANTAGE 02 Secondary Injection Overmolding
- ADVANTAGE 03 Built-In Soft-Touch Performance
Core Material Advantages
- 01
Long-Lasting Soft Touch
Silky, velvet feel that stays consistent across the full product lifecycle.
100,000+ abrasion cycles - 02
Clean Surface Performance
No oily coating or plasticizer bleed. Resists dust, stains and UV yellowing.
Zero-Oil / Easy to clean - 03
Strong Bonding & Design Freedom
Bonds directly to PC, ABS and PA for overmolding and two-shot designs.
> 3.8 MPa, no primer
Traditional Overmolding Materials Have Limitations.
TPU and silicone are widely used in soft-touch applications. However, conventional solutions can involve compromises in material performance, bonding processes, and surface finishing.
TPU Overmolding
TPU is a thermoplastic material that can be injection molded and overmolded onto compatible rigid plastic substrates.
Potential considerations
- Surface tackiness in certain formulations.
- Possible additive migration or surface changes during long-term use.
- Surface feel and stain resistance vary depending on formulation.
- Achieving a consistent premium soft-touch experience requires careful material selection.
Silicone Overmolding
Silicone offers excellent flexibility and elasticity and is widely used in soft-touch applications.
Potential considerations
- Certain bonding systems require primers or additional surface preparation.
- Conventional compression molding involves different processing and tooling requirements.
- Some applications use additional surface coatings to achieve specific tactile finishes.
- Design and production considerations differ from thermoplastic injection molding.
CHENVIX™ SkinTouch
CHENVIX™ SkinTouch offers an alternative approach:
- Designed for direct bonding with compatible rigid plastic substrates.
- No additional primer or bonding agent required for qualified material combinations.
- Processed through secondary injection overmolding.
- Soft-touch performance comes from the material itself rather than an additional soft-touch coating.
A Smarter Two-Step Overmolding Process.
CHENVIX uses a secondary injection overmolding process to integrate CHENVIX™ SkinTouch with compatible rigid plastic substrates.
The rigid component is molded first and then transferred into another mold for the secondary injection process.
-
STEP 01Rigid Substrate Molding
First, injection mold the rigid plastic component using compatible substrate materials such as PC or ABS.
-
STEP 02Secondary Injection Overmolding
Place the pre-molded rigid component into a second mold. Inject CHENVIX™ SkinTouch directly onto the compatible substrate without additional primer treatment.
-
STEP 03Integrated Finished Product
Create an integrated hard-soft composite structure featuring rigid internal support and a soft-touch elastomer exterior.
More Than Just a Soft Touch.
CHENVIX™ SkinTouch is designed for products that require a premium tactile experience and reliable surface performance.

Silky Matte Texture
A smooth and refined tactile surface.
Non-Greasy Dry Touch
A comfortable surface without an oily or greasy feel.
No Additional Soft-Touch Coating
The soft-touch experience comes from the material itself.
Oil and Stain Resistance
Designed to resist everyday oils, fingerprints, and surface contamination.
Abrasion and Scratch Resistance
Designed for demanding everyday applications.
Recyclable Thermoplastic
Thermoplastic processing and material recyclability.
CHENVIX™ SkinTouch vs. TPU vs. Silicone.
Choosing the right elastomer involves more than softness. Processing methods, bonding requirements, surface finishing, and long-term performance all matter.
| Factor | Recommended CHENVIX™ SkinTouch | TPU | Silicone |
|---|---|---|---|
| Material Type | Advanced thermoplastic elastomer | Thermoplastic polyurethane | Thermoset silicone elastomer |
| Processing Method | Injection molding, including secondary injection overmolding | Injection molding | Depends on silicone type; commonly compression molding or liquid injection molding |
| Overmolding Capability | Designed for direct bonding with compatible substrates | Depends on formulation and substrate | Depends on bonding system |
| Primer Requirement | No additional primer required for qualified material combinations | Depends on formulation and substrate | Certain bonding systems require primers or surface preparation |
| Additional Soft-Touch Coating | Not required; soft touch comes from the material itself | Application dependent | Application dependent |
| Surface Feel | Silky, matte, dry touch | Depends on formulation | Soft and elastic; finish depends on grade and surface treatment |
| Surface Migration Considerations | Designed to minimize surface migration and greasy surface issues | Depends on formulation and additives | Depends on grade and formulation |
| Design Flexibility | Thermoplastic injection molding supports integrated hard-soft designs | Thermoplastic injection molding design freedom | Design and tooling considerations differ from thermoplastic injection molding |
* Material behavior varies by grade, formulation, substrate, and application. Contact our team to evaluate your specific requirements.
Designed for Products People Touch Every Day.
CHENVIX™ SkinTouch enables manufacturers to combine rigid structural support with comfortable soft-touch surfaces across a wide range of consumer and industrial applications.
- STEP 01 Material SkinTouch Si-TPV selection
- STEP 02 · YOU ARE HERE Application Proven product categories
- STEP 03 Manufacturing Overmolding & Two-Shot
- STEP 04 Engineering Support DFM, tooling & sampling

Consumer Electronics
- Phone Cases
- Protective Covers
- Electronic Accessories
Smartphone cases are an important application example: a rigid inner structure for protection combined with a comfortable soft-touch elastomer exterior.
APPLICATION 01Consumer Electronics
- Smartphone Cases
- Earbuds Charging Cases
- Remote Controls & Device Housings
- + More
APPLICATION 02Wearables
- Smartwatch Bands
- Smart Glasses Temples
- Fitness Tracker Housings
- + More
APPLICATION 03Baby & Childcare
- Baby Bottle & Feeding Handles
- Sippy Cups & Drinking Cups
- Stroller Handles
- + More
APPLICATION 04Sports & Fitness
- Sports Equipment Grips
- Fitness Equipment Handles
- Bicycle Grips
- + More
APPLICATION 05Automotive & Mobility
- Automotive Interior Controls
- Gear Shift Knobs
- Automotive Key Fobs
- + More
- YOUR PRODUCTContact Our Engineers
Don't See Your Product?
SkinTouch adapts to any design that needs a durable soft-touch surface bonded to a rigid structure. Our engineers can evaluate your product from material selection through DFM, tooling, and sampling.
- Material & durometer recommendation
- Overmolding / Two-Shot feasibility review
- Prototype sampling toward mass production
Ready to evaluate SkinTouch in your own product?
Share your application and substrate. We'll respond with material guidance and a manufacturing path.
From Material to Finished Product.
CHENVIX supports custom overmolding projects through material evaluation, precision tooling, secondary injection molding, and quality inspection.
- DFM-Led Tooling
- Two-Shot & Insert Molding
Mold Development & Tooling
Custom mold design, precision tooling, CNC machining, and EDM capabilities.
Secondary Injection Overmolding
Custom elastomer overmolding onto compatible rigid plastic substrates.
Precision Manufacturing
Integrated product development and injection molding support.
Quality Control & Inspection
Dimensional inspection, visual inspection, process control, and product quality evaluation.
Need support from material selection through mass production? Talk to our engineering team about your project.
Explore Our Manufacturing CapabilitiesIs CHENVIX™ SkinTouch Right for Your Overmolding Project?
Material compatibility is essential for successful overmolding. Our team can help evaluate your substrate, product structure, bonding requirements, and processing conditions.
Substrate Compatibility
Evaluate PC, ABS, and other potential rigid plastic substrates.
Product Design
Review component geometry, overmolding areas, wall thickness, and bonding surfaces.
Material & Process Evaluation
Evaluate CHENVIX™ SkinTouch grade selection, injection conditions, and bonding performance.

Frequently Asked Questions.
1. What is elastomer overmolding?
Elastomer overmolding is a manufacturing process in which a soft elastomer is injection molded onto a pre-molded rigid plastic component to create an integrated hard-soft structure.
2. Can CHENVIX™ SkinTouch bond directly to PC or ABS?
CHENVIX™ SkinTouch is designed for direct bonding with compatible substrates such as qualified PC and ABS grades. Actual compatibility should be evaluated according to the material grade and application.
3. Does CHENVIX™ SkinTouch require primer or bonding agents?
For qualified compatible material combinations, CHENVIX™ SkinTouch can be directly overmolded without additional primer or bonding agents.
4. Is CHENVIX™ SkinTouch injection molded or compression molded?
CHENVIX™ SkinTouch is a thermoplastic material processed through injection molding, including secondary injection overmolding.
5. Does CHENVIX™ SkinTouch require additional soft-touch coating?
No additional soft-touch coating is required to create its inherent soft-touch surface properties.
6. Can CHENVIX help with mold development and product manufacturing?
Yes. CHENVIX can support material evaluation, mold development, secondary injection overmolding, and custom manufacturing projects.
7. Can I submit my own product design?
Yes. Customers can share product drawings, 3D files, samples, or project requirements for technical evaluation.
Let's Develop Your Next Overmolding Project.
Looking for a better way to combine rigid plastics with soft-touch elastomers?
Share your product requirements with our team. We can help evaluate material compatibility, overmolding processes, and manufacturing solutions for your project.
Your project information will be handled confidentially.
Project Inquiry
Fields marked with * are required.







